Menu
computorq3-picture2 computorq3-picture3
Product SKU : Computorq 3

Electronic Torque Wrench

The Computorq 3 Electronic Torque Wrench digitally displays fastener torque specification settings, torque readings and peak hold measurements.
Sales price:

Accredited ISO 17025 calibration certificate for Computorq 3 Electronic Torque Wrench available on request. Request QUOTE or Ask for CALIBRATION

Description

The COMPUTORQ 3 Electronic Torque Wrench is a simple to use digital readout wrench that displays real time torque values in any of four torque units, ft.lbs., in.lbs., Nm, kg.cm. Simply set the desired torque value and apply force until the green LED illuminates. Great for light industrial, automotive, motorcycle, watercraft and aircraft applications.

CDI Computorq3 - Features

DISPLAY - The wrench features a custom LCD display, use keypad to select torque units, readout in ft.lb., in.Ib., Nm, and kg.cm. Display also includes a 10 segment bar graph.

SETTING - Determine torque specification for fastener. Next, use the UP or DOWN arrow keys to scroll to the desired target torque value. NOTE: The target torque value is adjustable between 10% and 100% of full scale. The scrolling display rolls over at both ends for quick and convenient adjustment of setting.

TRACKING - While torque is applied, the display switches from preset value to actual applied value with a 0.20 second update rate.

AUDIBLE TONES AND LED’S - When the applied torque value equals -10% of the target torque value, a

  • YELLOW LED illuminates. When the target torque value is reached, the wrench outputs a 0.50 (1/2) second audible tone and the GREEN LED illuminates. At +10% of target torque the RED LED illuminates.
  • PEAK HOLD - When torque is released the display holds and flashes the peak torque reading for 10 seconds or until next torque is applied.
  • OVERLOAD - If the wrench is used beyond 100% of full scale the audible tone will pulse rapidly to warn the operator to stop. At 125% of full scale the display will lock and read “- - - -”.
  • ZERO - Wrench will automatically perform self calibration check and re-zero when powered ON. When powered ON, the wrench can be re-zeroed at any time by depressing the ON/ZERO key.

SETUP MEMORY - When powered ON, the wrench returns to the last unit and torque setting selected.

BATTERY - The Computorq 3 uses two (2) standard replaceable “CR123” lithium cells which provide more than 80 hours of continuous operation. The current battery level can be determined by viewing the battery indicator icon in the upper left corner of the LCD display. A flashing ‘bAtt” display means the wrench is no longer accurate and the battery must be replaced before continuing usage of wrench.

POWER ON - Depress and hold the ON/ZERO key until display illuminates.

POWER OFF - Depress the ON/ZERO key and hold for 5 seconds.

AUTO POWER OFF - Auto power OFF will occur after 2 minutes of non usage to conserve battery power.

ACCURACY:

  • ±2% CW of readings from 20% to 100% of full scale
  • ±3% CCW of readings from 20% to 100% of full scale

N.I.S.T. traceable certificate of calibration included

CDI Computor3 - specifications

MODEL CDI 2401CI3 CDI 1002CF3 CDI 2503CF3
Drive  1/4”  3/8”  1/2”
 ft.lb.  2.0 - 20.0  5.0 - 100.0  25 - 250
 in.lb.  24 - 240  120 - 1200  300 - 3000
 Nm  2.71 - 27.10  13.6 - 135.6  33.8 - 338
 kg.cm.  27.6 - 276  138 - 1382  345 - 3456

How to order

All prices in this website reflect net cost to you in Canadian dollars and does not include calculated shipping costs. Currently we accept credit card payments. However, you can submit your payment via cheques, wire transfers and purchase orders on approved credit.