The CHATILLON® STS Series torque sensors are full-bridge strain gauge sensors complete with 15-pin plug. These sensors are used exclusively with the Chatillon DFS II-R-ND Series digital indicator. The sensor’s torque values and sensitivity factors are stored in memory within the sensor plug. When connected to a DFS II-RND indicator, the capacity and calibration points are automatically recognized by the instrument. The instrument then becomes a fullfeatured torque measurement instrument. The STS Series torque sensor meets ASTM E4 and BS EN ISO 7500 part 1 for a +0.3% accuracy sensor. The sensors are connected to the DFS II-R-ND with a retractable cord that extends fully to nearly 9 ft. (3 m).
|STS-0003||50 x 0.005||3 x 0.0005||3.5 x 0.005||35 x 0.005||0.35 x 0.0001|
|STS-0012||192 x 0.02||12 x 0.002||12.5 x 0.002||125 x 0.02||1.25 x 0.0002|
|STS-0050||800 x 0.1||50 x 0.005||50 x 0.005||500 x 0.05||5 x 0.0005|
|STS-0100||-||100 x 0.01||100 x 0.01||1000 x 0.1||10 x 0.001|
|STS-0200||-||200 x 0.02||200 x 0.02||2000 x 0.2||20 x 0.002|
All prices in this website reflect net cost to you in Canadian dollars and does not include calculated shipping costs. Currently we accept credit card payments. However, you can submit your payment via cheques, wire transfers and purchase orders on approved credit.